Product Description

 

Product Description

 

TRIUMPH

FIBER LASER MARKING MACHINE

 

TR-F20M FIBER LASER MARKING MACHINE FOR ALL METAL AND SOME NON-METALS

Safety protection case

Technical Parameters

 

Model	TR-F10M	TR-F20M	TR-F30M	TR-F50M	TR-F100M
	TR-F10MS	TR-F20MS	TR-F30MS	TR-F50MS	TR-F100MS
Laser power	10W	20W	30W	50W	100W
Laser wave length	1064nm
Sandard marking area	110*110mm
Optional marking area	150*150  300*300 customerized aviliable
Minimum character	0.15mm
Marking speed	≤7000mm/s
Marking depth	0.01~1mm
Repeat frequency	20KHZ~80KHZ
Output laser beam quality	M²≤2
Focus spot diameter	< 0.01mm
Control interface	Standard USB port
Graphic format supported	BMP,JPG,AI,PLT,DST,DWG ETC.
Marking format	Text,symbols,graphics,images,barcodes,two-dimension bar. date marking,batch number,serial number etc.
Operating temperature	0-45°C
Cooling way	Built-fan for air cooling
Working voltage	220V-50Hz(single phase)or 110V-60Hx(single phase)
Computer	Including laptop cpmputer per set(software installed)
Laser marking oftware	Ezcad(English version)(the other optional software please contact us)
General power	<0.5KW
Working environment	Clean and dust-free or dust less
Working condition	5%~75%,free of condensed water
Optional device	Rotary marking attachment ;X/Y adjustable table

FEATURES

1.All in one structure with manual focusing system and user-friendly operation.

2..Laser beam qulity is much better than the traditional laser marking machine.

3.High electricitylaser exchange ratio, gross electricity consumption is less than 500W, which is 1/10 of the YAG’s consumption.

4.Free from maintenance, long working life, low consumption suitable for any working environment.

5.Fast marking speed, 2-3 times faster than the traditional marking machine

6.The marking software supports files such as Coreldraw, AutoCAD, Photoshop and PLT,PCX,DXF,BMP; SHX or TTF can be directly adopted; the functions such as autocoding for sequence No., batch number, date, barcode and so on.

7.Portable small size,light weight

 8.Humanizing operating process and good stability of equipment operating

9.Equipment comprehensive performance is stable and has 24 hours of continuous working ability

Applicable materials :All metals (including rare metals), engineering plastics, electroplate coating materials, 

coating materials, spraying materials, plastic rubber, epoxy resin, ceramics and so on. 

Applicable industry :Phone key, light penetration key, electronic parts and components, integrated circuit (IC), electrician electric appliance, communication products, sanitary wares, tool accessories, glasses and watches, jewelry, auto parts, buckles, kitchenware and stainless steel products industries.

 

TRIUMPH

Samples of LASER MARKING MACHINE

 

This machine can also mark stailess steel to black , white etc

Fiber marking machine main for engraving/marking all metal , such as logo , parameters , name cards etc ... also , for engraving/marking some non-metal , such as plastic .

Fiber laser marking machine has no consumables , and the lifetime of it is 100000hours , easy operation ,and with high engraving/marking speed .

 

 

1) Under operation system: windowns xp , windowns 7 ,windows8

2) Support Characters , digital, series NO, Date codes

3) Various types of fonts are supported. Such as TrueType, JSF(Single line font ), DMF(Dot Matrix Font,One-Dimensional bar code, Two-Dimensional bar code , and so on

4) Common types of images are supported. (bmp, jpg, gif, tga, png, tif…)

5) Common vector images are supported. (ai, dxf, dst, plt…)

6) Flexible variable text : changes the text real time while in laser processing . Excel datasheet is supported.
7) Imported fiber laser system
8) Excellent optical mode, long operating life, up to 100,000HS
9) The highest electro-optical conversion efficiency, up to 80%, but gross power less than 600W
10) Small size, steady, without maintenance, easy to operate
11) High precision, suited for fine processing on all metal and some non-metal.

 

12) This machine adapts the fiber laser and has high electro- optical conversion rate, the quality of laser beam is good, cooling with air- cooling methods, it has smaller shape, low power and much more energy-efficient. 

13) Divergent Angle is about a quarter of the pump laser semiconducto, especially mainly used in precise, fine marking3, low using cost, electro-optic conversion efficiency is up to 30%.

 

About laser marking machine of Triumphlaser :

1, Triumphlaser independent brand fiber laser
Two years warranty. Beam quality, laser power density, the output optical power stability, satisfy the mainstream market demand . Digital high-speed scanning galvanometer

2,Triumphlaser independent brand
Small size, fast speed, good stability, performance reached the international advanced level.

3, Triumphlaser independent research and development of the core control board and PC software
Powerful control system, according to the various data processing optimization of different process, support multi language switch, supports up to 256 color layer management functions, meet the application process requirements of most industry market.

 

 

CO2 laser marking machine for non-metal

We also produce CO2 laser cutting engraving machine , portable laser marking machine, fiber laser marker 

Samples of CO2 laser cutter engraver

 

 

 

 

Our Services

 

• We are a professional laser machines supplier with many years' experience in China, focusing makes professional !
• International Quality Certificates: CE and FDA.
• The whole machine has full 2 years’ warranty, the consumables is 6 moths (Including Laser system and Mirrors & Lens)
• The warranty is dated from Ex factory date; we will send you the parts for replacing free of charge during warranty; when the warranty is over, we'll charge for replacing.
• We will provide life tine service online, you can get tech support within 24 hours by Email| Telephone| Skype etc.

Packaging & Shipping

 

Packaging Detail:	Standard Ply-wooden case for exporting
Delivery Detail:	Within 3 working days after receiving payment

 

 

Laser cutter

More laser cutters and engravers

 

We are looking for agents all over the word ! 

Welcome to join us !!!

 

FAQ

 

 
Q. What power supply is needed to run a Laser engraving machine?
A. All Laser’s laser cutter and engraver machines run off AC 110 - 220V ±10%, 50 - 60Hz
Power.

Payment Terms︰ TT

Packing︰ Ply wooden case , water proof film , foam

Product Image